Some vehicle manufacturers even require that you replace your rotors rather than resurface them. Otherwise, most industry experts suggest that you should replace them every 30-70K miles. In any case, if the rotors are beyond resurfacing, replacement is your only option. via
Is it cheaper to resurface or replace rotors?
Pros: Cost: It is sometimes cheaper to replace the rotor than to resurface the rotor. You can get after-market brake rotors for a fairly low price, making it more cost-effective than either spending time doing the labor of resurfacing yourself or hiring and paying someone else to resurface your rotors. via
Is it necessary to resurface rotors?
Sometimes your rotors may need to be resurfaced because they have worn unevenly, warped from heat, or become damaged by worn brake pads or pitted from corrosion or rust. Resurfacing rotors removes some of their metal, until the surface is smooth and even again. Minimizes noise and vibrations when you brake. via
How long do resurfaced rotors last?
Typically, brake rotors last between 30,000–70,000 miles. But you should bring your car to a licensed mechanic for regular brake inspections and pay attention to your vehicle to know when you might be due for brake service. via
How much does it cost to have rotors resurfaced?
RepairPal.com, according to its quotes from mechanics across the United States, noted the average price could average between $235 and $329, with labor costs estimated to be $158 and $200, while parts are priced between $77 and $129. via
What happens if I don't replace my rotors?
If you don't replace the rotors when needed, you risk brake failure and an accident. The rotor absorbs and dissipates heat when the brakes are applied. The thinner the rotor becomes, the more heat is absorbed. This excess heat warps the rotor. via
Does O Reilly's turn rotors?
O'Reilly Auto Parts offers rotor turning services — also known as rotor resurfacing — at many of its locations. O'Reilly stores do, however, sell replacement rotors, brake drums, brake pads, and other parts needed to maintain and repair your brakes yourself . via
Can I resurface my rotors myself?
Take the brake rotor to a local machine shop to have it turned. Rotors cannot be turned by an amateur, since the process requires special equipment and special skills to be done properly. The machine shop will be able to look up the minimum thickness of your brake rotor to determine if it is still usable. via
When should you not resurface rotors?
Some manufacturers even recommend that rotors not be resurfaced at all. Instead, they recommend that, as long as the rotor is in good condition, the pads should be replaced. Once the rotors show signs of wear, out they go. Sometimes rotors become too worn out or damaged to replace. via
Can I put new brake pads on old rotors?
When a set of pads is worn out and need to be replaced, it is perfectly ok to install a new set of pads on the old rotors. Bedding in the new pads will wear off the old pad material and replace it with the material from the new pad. via
How do you know if your rotors need to be resurfaced?
If your brake rotors have sufficient metal remaining with no hard spots, cracks, severe grooving or rusting, then the rotors could be resurfaced. Some have the opinion that unless the brake rotors have surface issues needing to be fixed, the rotors should not be resurfaced every time the pads are replaced. via
Can I replace rotors and not pads?
It is true that when you replace just the rotors and keep the old brake pads, you save money and time. Even if you can get by with just replacing the rotors, you may want to replace the brake pads at the same time--even if they do not strictly need it. The grooved areas of the pads cannot reach the rotors. via
Do rotors last longer than pads?
Brake pads can last anywhere between 30,000 and 70,000 miles. Brake rotors last roughly 70,000 miles, but they need to be inspected for uneven wear. If they do become slightly misshapen, you can have them turned or machined to be round again. via
Should I replace all 4 rotors?
Although it is recommended by Ford to replace all four wheel brakes at the same time for safety, your idea should be OK. If you decide to get them replaced, consider enlisting a certified mobile mechanic who can service your brake pads and rotors at your own convenience. via
How much rotor wear is too much?
Under normal driving conditions, rotors should last 30,000 to 70,000 miles or longer. But rotor type or design, along with city or aggressive driving (where brakes are applied harder and more often, generating excessive heat), cause rotors to wear differently. via